Midi Functions; Setting Midi Time Code Operation; Setting Midi Clock/Spp - Tascam Model 12 Manual Del Usuario

9 - Other functions

MIDI functions

This unit can generate MIDI TIME CODE and MIDI CLOCK when
the recorder is playing back or recording.
The generated MIDI data is output from the MIDI OUT connector
and simultaneously sent to a computer connected by USB.
A DAW, for example, can be set to synchronize with the MIDI
time code from this unit so it can operate in time with the
recorder of this unit.
For details, check the operation manual of the hardware or
software product being used.
MIDI settings are made on the following screen.

Setting MIDI time code operation

When MIDI time code is enabled, it sends quarter-frame
messages during playback and recording. It sends full messages
when locating.
1.
When the recorder is stopped, select MIDI TIMECODE on
the MIDI Screen, and open the MIDI TIMECODE Screen. (see
"Menu operation procedures" on page 29)
2.
Turn the MULTI JOG dial to set MIDI time code operation.
Option Meaning
OFF (default) MIDI time code is not transmitted.
ON MIDI time code is transmitted.
NOTE
The MIDI time code frame type sent by this unit is 30 frames
per second (non-drop).
3.
Press the MULTI JOG dial to confirm the setting.
The MIDI Screen reopens.
52
TASCAM Model 12

Setting MIDI CLOCK/SPP

When MIDI CLOCK/SPP is enabled, MIDI CLOCK is sent during
playback and recording.
Song position pointers are sent when locating.
The MIDI Clock timing and song positions sent depend on the
metronome settings.
1.
When the recorder is stopped, select MIDI CLOCK/SPP on
the MIDI Screen, and open the MIDI CLOCK/SPP Screen. (see
"Menu operation procedures" on page 29)
2.
Turn the MULTI JOG dial to set whether or not MIDI CLOCK/
SPP is sent.
Option Meaning
OFF (default) MIDI CLOCK/ SPP is not sent.
ON MIDI CLOCK/ SPP is sent.
3.
Press the MULTI JOG dial to confirm the setting.
The MIDI Screen reopens.