Idiomas disponibles
Idiomas disponibles
•
3.3.4
Automatic switch-off setting
•
3.3.5
Setting the display backlight
•
3.3.6
Setting the switch-on mode
•
3.3.7
Setting the operating mode
•
•
•
If the device is not going to be used in the near future, turn
off its power supply by setting its switch to the "O" position
(off).
With the power on, press the HOLD button and then the
ON/OFF button to turn on the unit. The display will show "A-
ON" or "A-OFF". Press the ZERO button to select whether to
activate the automatic switch-off ("ON") or deactivate it
("OFF").
With the power on, press the HOLD button and then the
ON/OFF button to turn on the unit. The display will show "A-
ON" or "A-OFF". By pressing the UNIT button, the display will
read "L ON" (backlight on), "L OFF" (backlight off) or "L AU"
(automatic backlight control) - select one of these settings
with the ZERO button.
With the power on, press the HOLD button and then the
ON/OFF button to turn on the unit. The display will show "A-
ON" or "A-OFF". After pressing the UNIT button 3 times, the
display will show "J ON" (display shows zero when the device
is turned on) or "J OFF" (display of the placed weight when
the device is turned on) - select one of these settings with
the ZERO button.
Press and hold the UNIT and HOLD buttons, and then press
the ON/OFF button to turn on the unit.
The message "Ani. Su" appears. Then press the UNIT button
to select the activation or deactivation of the animal
weighing mode. With the ZERO button, select the option:
"ON"(active) or "OFF"(return to the normal weighing mode)
and accept the selection of the option with the HOLD button.
Press the HOLD button again and the display will show "Ani.
Kd". Then press the UNIT button to select the anti-shock
setting and use the ZERO button to select the range from 50,
100, 200 and 400. Confirm the selection with the HOLD
button. It is the selection of an anti-shock scale unit in the
range of 50, 100, 200 or 400. The lower value is suitable for
smaller animals.
