4.2.3 Dismantling
WARNING: Risk of clamping - Take care that no body parts and wires get trapped,
L
crushed or cut during dismantling.
WARNING: Risk of injury - Check the emergency stop (red pushbutton on the control
L
box) is activated, to avoid unintentional adjustment movements.
1. Secure the two casters at the back of the chassis by pressing
the caster brake plates down gently to their end stops with the tip
of your foot. To release the brake, push the brake plate gently back
up again with the front of your foot until the casters are free.
3. Remove the leg support by the locking pin .
4. Remove the footplate from the chassis of the patient hoist.
17
2. Remove the thorax support from the
slide column with the locking pin .
Albatros II
2022-08
Installation and adjustment
EN
NL