Vermeiren Albatros II Manual De Instrucciones página 15

3.3 Battery and charging
3.3.1 Battery
3.3.2 Control box + included battery charger
3.3.3 External charger (OPTIONAL)
3.3.4 Charging the batteries
Use only the control box with included battery charger on the Albatros II or the external charger
meant to be mounted on the wall.
We recommend that you should regularly recharge the batteries in order to ensure that the hoist
remains usable and to extend the lifespan of the batteries. The control box will give a warning
sound to tell you when the battery charge is low.
The battery is above the control box and is replaceable with an
integrated clip system.
Primary voltage
Ambient temperature
Ambient storage temperature
Relative storage humidity
Conformity
The control box is designed with a red emergency stop and an internal
battery charger.
Primary voltage
Secondary voltage (charging voltage)
Secondary current (charging current)
Safeguards
Ambient temperature
Ambient storage temperature
Relative storage humidity
Conformity
The external charger shall be mounted on the wall. It is possible to
charge the spare battery (optional) with this external charger and you
have no waiting time to use the patient hoist when charging the
batteries.
Primary voltage
Charging current
Ambient temperature
Ambient storage temperature
Relative storage humidity
11
Using the patient hoist
24 VDC
+5°C to +40°C
-10° to +50°C
max. 80% (non-condensing)
tested in accordance with IEC 60601-1
100 - 240 VAC / 50/60 Hz
24 VDC, max. 250 VA
max. 10 A
Protected against reverse
polarisation, electrical surges
and extreme temperature
+5°C to +40°C
-10° to +50°C
max. 80% (non-condensing)
tested in accordance with
IEC 60601-1
We reserve the right to introduce technical changes.
100 - 240 VAC / 50/60 Hz
max. 650 mA
+5°C to +40°C
-10° to +50°C
max. 80% (non-condensing)
EN
Albatros II
2022-08
NL