Dometic CLASSIC RH 423LDA Instrucciones De Montaje Y De Uso página 16

Ocultar thumbs Ver también para CLASSIC RH 423LDA:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
Operation
• The minimum clearance between the minibar's back and the surrounding struc-
ture should be as follows:
No. in
fig. a, page 7
2
3
• The ventilation duct must at least measure 105 mm x the width of the minibar.
• The entire cooling unit must project into the ventilation duct as shown.
• Air passing through the ventilation duct must not be preheated by any source of
heat.
• The ventilation duct must be kept free from any obstacles. Especially portable
multi socket outlets or portable power supplies, which can get warm, must not
be kept at the rear of the minibar.
➤ Fix the minibar through its fixing feet as shown (fig. b, page 8).
6
Operation
6.1
Before first use
Before first use, clean the minibar inside and outside with a damp cloth for hygienic
reasons (see also chapter "Cleaning and maintenance" on page 20).
6.2
Saving energy
• Only open the minibar as often and for as long as necessary.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
16
Min. distance
20 mm
105 mm
RH423, RH429, RH439, RH449
EN
loading