8
SPARE PARTS
8.1
Filter unit
The following spare parts are available for the filter
unit;
- refer to exploded view Fig. IX on page 99
8.2
Control box
The following spare parts are available for the control box;
- refer to exploded view Fig. X on page 101
8.3
Extraction arm
The following spare parts are available for the extraction arms;
- PolyArticule: refer to the corresponding manual
8.4
Extraction fan
The following spare parts are available for the fan;
- Fan 3.0: refer to the corresponding manual
- Fan 4.7: refer to the corresponding manual
9
ELECTRICAL DIAGRAM
Refer to the separately supplied electrical diagram.
10
DISPOSAL
Dismantling and disposal of the unit must be done
by qualified persons.
Personal protective equipment (PPE)
Wear respiratory protection and protective
gloves when you dismantle and dispose of
the unit.
10.1
Dismantling
To safely dismantle the unit, obey the safety instructions that
follow.
Before dismantling of the unit:
- disconnect it from the mains
- disconnect it from the compressed air
- clean the outside
During dismantling of the unit:
- make sure that the area is sufficiently ventilated, e.g. by a
mobile ventilation unit
After dismantling of the unit:
- clean the dismantling area
10.2
Disposal
Dispose of the pollutants and dust, together with the used
filter cartridge, in a professional manner in accordance with
federal, state or local regulations.
86958015
EN | 16