SonoSite M Serie Guia Del Usuario página 15

Connecting Triple Transducer Connect
The Triple Transducer Connect (TTC) is an optional three-transducer module for the MDSm that
allows connection of up to three transducers simultaneously while the ultrasound system is docked.
Connect
transducer
connector on
TTC to system
Figure 6 Connect Transducer Connector to System
Connect
transducer to
TTC
Select
transducer
1 Raise locking lever.
2 Pull the transducer latch up and rotate 90°.
3 Align and insert the transducer connector to the connector on the bottom of
the ultrasound system.
4 Turn the latch back 90° and press in, securing the transducer connector to the
ultrasound system.
5 Place the system into the MDSm.
Connection is made when the locking lever is pushed down.
Ultrasound
system
Transducer
connector
Transducer
select buttons
1 Pull the transducer latch up and rotate 90°.
2 Align and insert the transducer connector to the connector on the bottom of
the TTC.
3 Turn the latch and press down, securing the transducer connector to the Triple
Transducer Connect.
Note: When you use the TTC, there may be a minor reduction of transducer
penetration.
Push the transducer select button on the TTC to select the desired transducer. See
Figure 6 on page 13.
• When selecting another transducer, the system restarts. The light on the button
flashes momentarily and then turns solid green.
• Only one transducer is accessible at a time.
Locking lever
Connecting Triple Transducer Connect 13