STEINEL True Presence COM1 Manual De Instrucciones página 70

6. Function
Factory settings
The factory settings are activated when the sensor is put
into operation for the first time as well as after resetting via
the Steinel Connect app.
HF 360-2
– Reach:
– Sensitivity:
Hallway
– Reach S:
– Reach L:
– Sensitivity S:
– Sensitivity L:
True Presence
– True Presence
– True Presence
– Scenario:
All sensor versions
– Twilight level:
– Time setting for COM1:
– Time setting for HVAC:
– Fully / semi-automatic mode:
– Switch-ON delays for HVAC:
Setting detection
The Steinel Connect app can be used to configure the
detection zone by digital means for all versions.
The detection zone for the HF 360-2 can also be limited by
fitting film shrouds, see Figs. 6.1 to 6.3.
®
height:
®
radius:
®
– 70 –
100 %
100 %
100 %
100 %
100 %
100 %
2.6 m
4.5 m
500 lux
5 min
15 min
fully automatic
OFF
Contents
7