Idiomas disponibles
Idiomas disponibles
Setting the On/Off timer
Setting the On timer
When the air conditioner is off;
Remote controller display
You can select from Auto/Cool/Dry/Fan /Heat .
You can set the temperature after selecting the operation mode .
Temperature adjustment is available when Auto/Cool/Dry /Heat mode is selected .
• After 10 seconds from the completion of the On timer setting, only (On) indicator will remain displayed on
the remote controller display .
• You can not set the fan speed when setting the On timer .
• If you press the Power button on the indoor unit after setting the On timer from the remote controller, Timer
indicator on the indoor unit display will disappear and the On timer will be cancelled . Even though the On
timer is cancelled, (On) indicator on the remote controller will remain displayed .
• When the On timer is set while the air conditioner is off, Timer indicator will be displayed and remain on until
the On timer turns on.
Midea ODM Latin America IB&IM_HP_EN.indd 17
1 . Press the Timer button .
2 . Press the
button until (On) indicator starts to blink .
3 . Press the SET button to set the On timer .
- (On) indicator will keep blinking and you can set the time .
4 . Press the
button to set the time .
- You can set the time in half hour unit from 30 minutes (0 . 5 on the display) ~
3 hours and hour unit from 3~24 hours .
- Time can be set from minimum 30 minutes to maximum 24 hours .
5 . Press the SET button to complete the On timer setting .
- (On) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator will be lighted up on the indoor unit
display .
- On timer setting will be cancelled if you don't press the SET button within
10 seconds after setting the time . Therefore, check for the (On) indicator on the
remote controller display and the Timer indicator on the indoor unit display .
f Press the
Cancel
and press the SET button .
f Press the Power button .
additional options available in On time
English-17
button to make the set time to display as
,
2014/6/11 11:42:35
