Hikmicro CHEETAH Serie Guia De Inicio Rapido página 6

Steps
1. Turn off the device first. Align the installation holes on the device and the rail.
2. Insert the screws through the holes.
3. Tighten the screws to secure the rail on the device.
Zeroing
Steps
1. Select
enter the reticle setting interface.
2. Rotate the wheel and select Freeze to freeze the
image.
3. Rotate the wheel to select Distance and set the
distance to the target.
4. Aim the big reticle at the target.
5. Rotate the wheel to select the coordinates, and
press the wheel to switch the X and Y axis.
6. Rotate the wheel to move the reticle until it
reaches the target position. The small reticle
indicates the initial position.
4
in main menu, and press the wheel to