Hikmicro CHEETAH Serie Guia De Inicio Rapido página 4

Button Description
Power Key
Laser Key
Wheel
*
Press Laser Key and Wheel at the same time to capture snapshots.
4. Install Battery
Steps
1. Turn the battery cover anticlockwise to loosen it.
2. Insert the battery into the battery compartment as the positive and negative marks indicate.
3. Turn the battery cover clockwise to tighten it.
Note:

Remove the battery if you aren't making use of the device for a long time.

The battery type is 18650 with the protection board. The battery size is 19 mm × 70 mm. The rated voltage is 3.6 VDC, and the
battery capacity is 3200 mAh.
Press: standby mode | Hold: power on/off
Press: measure distance with laser | Hold: switch display modes
Press: start/stop recording | Hold: menu operation | Rotate: switch digital zoom
2