Clutch Operation - Bulldog DC Serie Manual De Instrucciones

Cabrestantes eléctrico
Ocultar thumbs Ver también para DC Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2.5 For First Time Operation
2.5.1 Connect the Remote Control
Always keep the Industrial grade and waterproof
remote control wire clear of the winch, wire/syn-
thetic rope and roller/hawse fairlead. Figure 9.
CAUTION
DO NOT leave the pendant control plugged into
the winch when not in use. This may result in a
dangerous condition and/or battery drain.
1. Press and hold the Cable In Button for rope
winding in operation.
2. Press and hold the Cable Out Button for rope
winding out operation.
3. To stop winching, release the Cable In or Cable
Out Buttons. Figure 10.

2.6 Clutch Operation

WARNING
NEVER engage or disengage clutch if winch is under load, winch rope is in tension or drum is
rotating.
To prevent damage, ALWAYS fully engage or fully disengage the clutch lever.
The clutch lever, located on the winch housing opposite the motor, controls the clutch position. When
the clutch is engaged, the gear train is coupled to the winch drum and power can be transferred from
the winch motor.
2.6.1 Disengage Clutch For
Free-Spooling
Turn the handle 180° counter-clockwise rotation
to the "Disengaged" position, rope can now
free-spool off the drum. Figure 11.
2.6.2 Engage Clutch For Winching
To engage, turn the clutch handle 180° clockwise
to the "Engaged" position. Never engage the
clutch while the drum is rotating.
Figure 12.
12
CEQUENT
Operation Instructions
PERFORMANCE PRODUCTS, INC. •
Figure 9 - Connect Remote
Figure 10 - Remote Control Operation
Cable-Out
Figure 11 - Disengage Clutch
Disengaged
Figure 12 - Engage Clutch
F4024-00 REV C (7026) 7/16
Cable-In
Engaged
Tabla de contenido
loading

Este manual también es adecuado para:

Dc9.0Dc12.0

Tabla de contenido