Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 29 Thursday, December 22, 2022 4:06 PM
- Press and hold Remote Start for approximately three seconds to connect to the network.
• Salt Refill
- This LED flashes when the salt level is low. The LED automatically shuts off when the salt is refilled.
Chime On/Off Button
c
• To activate or deactivate the button sounds, press and hold Extra Dry and Delay Start
simultaneously for three seconds. The error alert sound cannot be turned off.
Cancel Button
d
• The drain pump activates and the cycle cancels. Once the dishwasher finishes draining, the power
turns off.
• Press and hold Start for three seconds to activate.
Start Button
e
• To operate the machine, either press Start and close the door within four seconds or close the door
and press Start.
• An alert will sound if the door is closed more than 4 seconds after the Start button is pressed.
Wash Cycles
Select your desired cycle.
Auto
This cycle senses the soil amount and soil
toughness and is optimized to achieve the best
cleaning.
Heavy
This cycle is for heavily soiled dishes and dishes
with hardened on soil. This cycle defaults to the
strongest spray intensity and uses it to wash
heavily soiled dishes.
Delicate
Use this cycle to clean delicate items such as fine
china and stemware.
Refresh
This cycle freshens up and warms dishes that have
been unused for a long time.
• Do not use detergent when using this cycle.
• The steam option cannot be turned off on this
cycle.
Normal
This cycle is for daily, regular, or typical use to
completely wash a full load of normally soiled
dishes. The energy usage label is based on this
cycle without any options.
Turbo
This cycle will clean heavily soiled dishes in an hour
using slightly more energy and water.
• This cycle does not have drying. Select the Extra
Dry option for better drying.
Download Cycle
Use a dedicated cycle downloadable via Wi-Fi or
NFC.
NOTE
• Only the cycle code for the current Download
Cycle appears on the appliance. See the
smartphone app for cycle codes, names, and
more information about the available cycles.
- Default Cycle : P1. Pots & Pans
Machine Clean
This cycle is for cleaning the inside of the
dishwasher. Use the cycle without dishes in the
machine. It eliminates residual soils, odor, white
spots, and other dirt. Add citric acid or another
cleaning agent for more effective results.
• Press and hold Heavy for three seconds to
activate.
OPERATION
29
