Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 27 Thursday, December 22, 2022 4:06 PM
2) Add the detergent.
3) Turn on the dishwasher.
4) Check the rinse aid.
5) Select the cycle and options.
6) Operate the dishwasher.
• Method 1
- Press the Start button and then close the
door in less than four seconds to operate
the dishwasher. If the door is not closed
within four seconds, an audible tone is
heard, and the cycle does not start.
• Method 2
- Close the door first and then press the
Start button to operate the dishwasher.
NOTE
• If the door is opened during the cycle, the
dishwasher will stop. To resume the cycle, see
methods 1 and 2 above.
• If the door is opened during the cycle and is not
closed within four seconds after selecting the
Start button, or if the door is closed without
pressing the Start button, the white LED with
time flashes, an audible tone is heard, and the
cycle does not start.
7) End of cycle.
• When the cycle is complete, a chime will
sound and the display will show
door is opened or Power is pressed. To save
energy, press and hold Delay Start and
Remote Start simultaneously for three
seconds to set the
automatically turn off a few minutes after
the cycle ends.
• It is normal for the dishwasher to chime
continuously if you open it during operation
or just after the cycle ends. The dishwasher
is letting you know that the interior
temperatures of the unit are hot and to use
caution when reaching inside. Once the unit
has cooled down, the chiming will stop.
For more details, refer to the online owner's
manual.
CAUTION
• Do not open the door during operation or
immediately after it has completed the wash
cycle as the escaping steam may cause scalding
as the door is opened.
until the
ENd
display to
ENd
Auto-Off
The dishwasher automatically turns off after four
minutes of inactivity if paused or if no cycle is
started.
OPERATION
27
