Kärcher T 9/1 Bp Manual De Instrucciones página 12

Ocultar thumbs Ver también para T 9/1 Bp:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
 Check whether main filter basket has
been inserted into the appliance.
Operating modes
1 Operation with fleece filter bag or paper
filter bag (option)
2 Operation without filter bag
Installation of the filter bag
 Release and remove the suction head.
 Remove the main filter basket.
 Install the fleece filter bag or the paper
filter bag (option).
 Insert main filter basket.
 Insert and lock the suction head.
Insert the battery
 Push in the battery into the battery com-
partment and snap it in place.
Charge the battery
Note: Please read the operating instruc-
tions of the charger manufacturer, espe-
cially the chapters on safety instructions!
The battery is partially charged at the time
of delivery. Charge it before appliance
startup and then as and when required.
Note: The battery can be charged only
when it is removed out of the appliance.
 Press the unlocking key and remove
the battery.
 Insert the charger delivered with the ap-
pliance into a proper socket.
 Insert the battery in the charger.
Charging time for empty battery
Quick charger BC 1/7
12
Start up
min 60
Charging indicator
 Press the button for charging indicator
at the battery. The charging indicator
glows 1 minute.
Charging indicator has not activated for 60
minutes (sleep mode):
 Press the button for charging indicator
at the battery twice. The charging indi-
cator glows 1 minute.
Turning on the Appliance
 Switch on the appliance at the main
switch.
Eco mode (energy saver mode): The appli-
ance works with reduced suction perfor-
mance. The battery life will extend.
 To switch on eco mode: Press the eco
switch. Indicator lamp in the switch
glows green.
 To switch off eco mode: Press the eco
switch again. Indicator lamp in the
switch goes off.
Cleaning operations
Note: The battery life will shorten because
of increased cleaning performance while
cleaning textile covering.
 Set the selection switch of the floor noz-
zle to hard surface or carpet.
 Regulate the suction force on the suc-
tion force regulator (continuous).
 Perform the cleaning operation.
Turn off the appliance
 Switch off the appliance at the main
switch.
After each operation
 Empty the container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
– 3
EN
Operation
Eco mode
loading