Idiomas disponibles
Idiomas disponibles
3
Using the Oscilloscope
Level
See
Baud rate
Press
the bus signal.
If the selected baud rate does not match the system baud rate, false triggers may
occur.
Sample point
Press
represents the percentage of time between the beginning of the bit time to the
end of the bit time.
Standard
Press
Extended CAN (2.0B).
Standard CAN has an 11-bit long identifier while Extended CAN has a 29-bit long
identifier.
Trigger
Press
60
"Level"
on page 55.
and press
and press
and toggle
>
repeatedly to set the baud rate to match
repeatedly to set the sample point, which
to select Standard CAN (2.0A) or
to trigger on the SOF bit of a Data frame.
Keysight U1610/20A User's Guide
