Idiomas disponibles
Idiomas disponibles
CAUTION
Do not allow the vacuum cleaner to
remain in one spot for any length of time
when the brushroll is turning. Damage
to carpet may occur.
4. Once the vacuum is on, operate the
vacuum cleaner by tilting the wand back
towards you and the nozzle is flush with
floor surface.
NOTE:
Brushroll does not rotate in either
mode when handle is in fully upright
position.
5. Once you have completed vacuuming,
switch to the "O" position and unplug
the power cord from the power outlet.
NOTE:
Select the right mode when
using this vacuum cleaner. Do not press the
switch to the "II" position when cleaning
the bare floor, otherwise it will damage
the floor.
BRUSHROLL INDICATOR LIGHT
Light Color Status
Green,
The brushroll is spinning and
Continuous
working as it should.
There is a jam in the brushroll
Red,
area. Turn off and unplug
Continuous
the vacuum, and remove any
blockages in the nozzle.
No Light
The brushroll is off.
OPERATION MODES
ABOVE FLOOR MODE
1. Place the vacuum cleaner in the upright
2. Press the wand release button and lift up
3. Choose the desired attachment and
4. Turn on the vacuum cleaner by pressing
5. Once you have completed vacuuming,
NOTE:
directly into the handle for above floor
cleaning.
Brushroll
Indicator
Light
- 12 -
locked position.
the wand for above floor cleaning.
Wand Release Button
insert it into the wand.
Wand
the switch to the "I" position.
switch to the "O" position and unplug
the power cord from the power outlet.
The attachment also can insert
Handle
3-in-1 Combination
Tool
3-in-1 Combination
Tool
