Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING TIPS
Before calling service, review this list. It may save you time and expense. This list includes common
occurences that are not the result of defective workmanship or materials of this appliances.
Problem
Unit does not turn
on when pressing
ON/OFF button
Unit does not cool
well
The unit is noisy and/
or vibrates too much
The unit makes a
gurgling sound
Unit will not connect
to Wireless or App
does not work
(some models)
NOTICE
Do not add extension to the exhaust hose(s)!
User Manual
Solution
Displays P1 Error Code and means the water collection tray is full. Turn off the
unit, drain the water from the water collection tray, and restart the unit.
If room temperature is lower than the set temperature in COOL mode, reset
the temperature.
The air fi lter is blocked with dust or animal hair. Turn off the unit and clean the
fi lter according to the instructions.
Exhaust hose is not connected or is blocked. Turn off the unit, disconnect the
hose, check for blockage and reconnect the hose.
Temperature setting is too high; decrease the set temperature.
Make sure all windows and doors are closed.
The room area could be too large; doublecheck the cooling area.
Check the room for possible heat sources and remove them if possible.
The fl oor is not level. Place the unit on a fl at, level surface.
The air fi lter is blocked with dust or animal hair. Turn off the unit and clean the
fi lter according to the instructions.
This sound is caused by the refrigerant fl ow inside the unit and is normal.
For additional support and troubleshooting tips, follow the link in the QR code:
Page 19
