Idiomas disponibles
Idiomas disponibles
Return
1. Start / pause» button
A. In standby mode, press this button to have your appliance automatically start its cleaning cycle.
Return
its cleaning cycle.
Start
B. When the appliance is in sleep mode,press this button to exit sleep mode.
C. In operation, press this button to stop the cleaning cycle.
Pause
2. Direction buttons
Return
Start
A. Forward ▲
Pause
In standby or operation, press this button to move the unit forward.
B. Backward ▼
Start
Edge
Powerful
In standby or operation, press this button to move the unit backward.
Pause
C. Left ◀️
In standby or operation, press this button to make the unit turn left.
D. Right ▶
Auto
In standby or operation, press this button to make the unit turn left.
Edge
Powerful
Edge
Powerful
Auto
Auto
3. Auto button
Press this button to start the
automatic cleaning cycle.
NOTE :
- 2 AAA (LR03) 1.5V batteries are required
1. Place the loading base against the wall
obstacle. Leave 2 metres of space at the front. Then connect the power cable
and make sure the LED light is on.
2. Switch on the appliance by pressing the switch.
and goes into standby mode.
Warning: Before recharging the device, make sure that the switch is set to «I». If
the switch is on «O», the robot will not be able to recharge.
Remote control
Return
Start
Pause
Edge
Powerful
4. Power Button
Auto
Press this button to start
cleaning the desired area.
The suction power is more
intense than in automatic
mode.
Starting up the product
with 1 metre clearance from any
The robot emits a sound
Return
Start
Pause
Edge
Powerful
5. Edge button
Auto
Press this button to start
cleaning along the skirting
boards.
- If the remote control will not be used for a long time,
remove the batteries.
Return
6. Return button
Press this button to instruct
the robot to return to its
charging base.
Start
Pause
Edge
Powerful
Auto
