Idiomas disponibles
Idiomas disponibles
USER MANUAL
For clamp types:
EN
04
© The Crosby Group LLC. Nothing from this original user instructions publication may, in any way
whatever, be replicated or published without prior written permission from The Crosby Group LLC.
1.
General
You have chosen a CrosbyIP lifting clamp.
CrosbyIP lifting clamps are the most reliable lifting clamps available. But using reliable tools does
not automatically mean that practices are reliable. The people who work with clamps play an
It is not
equally important role in reliable lifting. Ensure that everyone who works with CrosbyIP lifting
permitted to stay
clamps has been instructed in the proper application of the clamps.
in the danger
zone of the load.
CrosbyIP provides a 10 year warranty for its clamps. To keep CrosbyIP lifting clamps in optimum
condition and keep warranty, regular maintenance is important. Preventive maintenance and repair
Ensure that the
shall be carried by a repairer authorized by CrosbyIP. In order to benefit from this warranty pro-
load remains on
gramme and for more details on maintenance procedures, please consult www.thecrosbygroup.
the ground when
com/resources/crosbyip-10-year-guarantee for more information.
turning.
Please read and understand these instructions before using the lifting clamp.
Attention! Do not
put your hands in
the jaw aperture,
2.
Safety precautions
the locking cam
(L) could be
„ Proper instruction for the personnel is of vital importance. This will contribute to maximum
activated,
reliability in the working environment.
causing the
„ IP(U)10A clamps may be applied per piece, per set or several at the same time for the lifting of
camsegment (B)
plates.
to close.
„ Ensure that each clamp receives its proportionate share of the load. When using two clamps
or more, a spreader beam is recommended.
No changes may
„ Hardness: With the standard clamps it is possible to lift steel with a surface hardness of 363
be made to
HV10. For harder steel types contact your CrosbyIP Customer Service Centre.
CrosbyIP
„ Contact your CrosbyIP Customer Service Centre before using this clamp for plates and
clamps. Never
constructions that have a radius.
straighten,
„ Temperature: the operating temperature is between –40 ºC (–40 ºF) and 100 ºC (212 ºF). For
attempt to bend
other temperatures contact your CrosbyIP Customer Service Centre.
or heat treat
„ There are restrictions for operation in special atmospheres (e.g. high humidity, explosive, saline,
parts.
acid, alkaline).
„ Loads: For proper application of the clamp consult the load diagrams 1.
Clamps suited
„ Ensure that all attachments between lifting eye and crane are properly fitted, secured and
for stainless
coupled.
steel, must be
„ For each lift only one plate may be transported or lifted.
used only for
„ The clamping yaws may not be placed on sloping or conical surfaces. Contact your CrosbyIP
handling
Customer Service Centre for assistance in selecting a clamp suitable for bevelled plates.
stainless steel,
„ When the crane hook or attachment is too large and/or too heavy, use properly sized CrosbyIP
to avoid contact
corrosion.
Copyright © 2021 The Crosby Group LLC. All Rights Reserved.
IP(U)10A
Vertical lifting
