Idiomas disponibles
Idiomas disponibles
30PPM
No alarm for 120 minutes
50PPM
Between 60 to 90 minutes
100PPM
Between 10 to 40 minutes
300PPM
Less than 3 minutes
Note: Refer to "5. Actions to Take When Alarm Sounds" when you hear the sound of the CO
detector warning.
CO Detector Warning Silence
When the device is in CO detector mode, pressing the TEST/SILENCE button will pause
the detector's alarm sound for about 10 minutes. The ALARM indictor (red) will keep
flashing to indicate the detector is entering the CO detector silence mode.
Notes:
• The audible alarm signal will reactivate about 10 minutes from the time the TEST/SILENCE
button is operated where the concentration of CO surrounding the alarm remains at 50 PPM or
greater.
• The audible alarm signal cannot be silenced if the alarm is at concentration above 200 PPM.
• The alarm silencing activation is once throughout a CO detector period.
WARNING! Before you enable the CO detector warning silence feature, you
should assume that the alarm is due to dangerous levels of carbon monoxide
and the residence should be evacuated.
Human Alarm Sounds
If the alarm enters the CO detector warning status, the alarm will begin sounding in a lower
alarm volume (<85dB) for the first 8 sounds, then issuing a normal alarm volume (>85dB).
This is to prevent people from being frightened by the sudden intensity of the alarm sound.
9
