Idiomas disponibles
Idiomas disponibles
6. Maintenance
To keep your CO detector in good working order, please follow these simple steps:
• Verify operation of the unit's alarm sound and indicators by pressing the
TEST/SILENCE button once a week.
• Remove the unit from the wall and clean the alarm cover and vents with a soft brush
attachment once a month to remove dust and dirt.
• Never use detergents or other solvents to clean the unit.
• Avoid spraying air fresheners, hair spray, or other aerosols near the CO detector.
• Do not paint the unit. Paint will seal the vents and interfere with the sensor's ability to
detect CO. Never attempt to disassemble the unit or clean inside. This action will void
your warranty.
• As soon as possible, place the CO detector back in its proper location to assure
continuous protection from carbon monoxide poisoning.
• When household cleaning supplies or similar contaminants are used, the area should
be ventilated.
WARNING:
The following substances can affect the sensor and may cause false actions:
methane, propane, isobutene, isopropanol, ethylene, benzene, toluene, ethyl
acetate, hydrogen sulfide, sulfur dioxides, alcohol-based products, paints,
thinner, solvents, adhesives, hair sprays, aftershaves, perfumes and some
cleaning agents.
Your CO detector will not be operational and will not monitor for CO levels
without battery.
This apparatus is designed to protect individuals from the acute effects of
carbon monoxide exposure. It will not fully safeguard individuals with
specific medical conditions. If in doubt consult a medical practitioner.
12
