ENGLISH
To remove and replace the plates:
- Open the device.
- Slide the two release tabs (6) from the plate (5) backwards and remove them, repeat the
process with the other plate (5) if you want to remove or replace it.
- Select the desired plates (5), clip them into position and carefully press them until they are
fixed into position.
Warning
Always allow the device to cool down before assembling or disassembling the plates.
How to use the 3 in 1 sandwich maker:
- Apply oil or butter on the cooking plates.
- Close the sandwich maker and plug it to the mains supply. The indicator light (2) will turn
blue. Then, lock it with the latch on the handle.
- After the product is preheated, the indicator light (2) will be off.
Warning
The cooking plates and metal surfaces of the unit will become extremely hot when in use.
Wear heat resistant mittens and touch only the handle of the sandwich maker.
- Unlock the handle lock (3) and lift the top housing (1) using the handle. Place food on the
cooking plate using wooden or heat-resistant silicone utensils.
Warning
Do not use metal utensils on this product, as they may scratch the cooking plates.
- Use the handle to lower the top housing (1) by pressing on the food, and lock the handle.
- The cooking time may differ depending on the type and thickness of the foodstuffs.
- During the process the resistor will turn off and on to keep a constant temperature, so
the indicator light (2) will be on when it is heating and off when it reaches the desired
temperature.
- Food should always be cooked thoroughly before consumption.
- When the food is cooked as desired, unlock (3) and lift the top housing (1) and remove the
food using wooden or heat-resistant silicone utensils. If you want to keep cooking, close
the appliance to conserve heat.
- Repeat these steps as many times as necessary, reapplying cooking oil or butter on the
plates (5) if necessary.
- Unplug the appliance from the mains supply, open it and let it cool down completely.
- Clean it as explained in the "Cleaning and Maintenance" section below.
36
ROCK'NTOAST 4IN1
4. CLEANING AND MAINTENANCE
- Unplug the appliance and let it to cool down before cleaning. The unit is easier to clean
when slightly warm. Do not immerse the product in water, nor wash it in dishwashers.
- Wipe the cooking plates with a soft cloth to remove food remains. If any foodstuff has
stuck to the cooking plates, pour a bit of warm water mixed with detergent over the food
residue and clean the plates with a non-abrasive scouring pad.
- Do not use abrasive materials that could scratch or damage the non-stick coating.
- Wipe the outside of the appliance with a damp cloth only. Do not clean the outside with
any abrasive scouring pad, as this will damage the finish. Do not immerse in water or any
other liquid.
- Store the appliance in a dry and cool place.
- The power cord can be wound around the base of the product for its storage.
- You can use the lock to keep the plates together, in order to store the product in upright
position.
5. TECHNICAL SPECIFICATIONS
Product reference: 04309
Product: ROCK'NTOAST 4in1
Power: 1000 W
Voltage and frequency: 220-240 V~50-60 Hz
Made in China | Designed in Spain
6. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE) specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimise the recovery and recycling
of the materials they contain and reduce the impact on human health and
the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation to dispose of the appliance correctly. Consumers must contact
their local authorities or retailer for information concerning the correct disposal of old
appliances and/or their batteries.
ENGLISH
ROCK'NTOAST 4IN1
37
