Cleaning And Maintenance; Troubleshooting - cecotec Power Latte Spume 4000 Manual De Instrucciones

7. CLEANING AND MAINTENANCE

1. Turn off and unplug the milk frother.
2. Remove the jug from the heating base.
3. Separate the silicone ring and the lid from the jug.
4. Clean the jug with warm water a soap. This should be done immediately after each use.
5. Rinse the lid and silicone ring in warm water. Clean with soap if necessary.
6. Wash the whisks with warm water a soap and dry them thoroughly.
7. Store the product and the whisks in a safe place.
WARNING: never use harsh or abrasive cleaning agents or cloths/pads to clean or dry the milk
frother.
WARNING: the milk frother is not dishwasher safe.

8. TROUBLESHOOTING

Issue
The indicator light
or jug does not
work.
The jug does
not work after
operating.
The motor does
not work.
The appliance
does not heat up.
Cause
The plug is not inserted properly.
The jug is not connected to the
power base properly.
There is a problem with the
power supply.
The jug temperature is too high.
The jug is damaged because it
has been immersed in water.
The jug has not been cleaned
properly after each use.
The motor is damaged.
The machine is damaged.
ENGLISH
Solution
Insert plug again.
Remove jug and replace
correctly.
Check the electric circuit.
Rinse the jug with cold water
to reduce temperature.
Repair or replace.
Clean and move the motor's
shaft with your hand to
loosen and unblock it.
Repair or replace.
Repair or replace.
POWER LATTE SPUME 4000 15