Philips HomeRun 7000 Serie Manual De Instrucciones página 12

English
14
Map Edit
In the app, you can use Map Edit to:
-
Edit rooms (merge/divide rooms, name rooms) so you can customize the
cleaning routine of the robot per room.
-
Set up restricted areas to specify where the robot is allowed to clean and
where it is not.
-
Create a map for each floor of your home and store up to 5 maps. When you
use the appliance, it generates a new map in a new environment. If you have
maps that you use frequently and do not want to accidentally overwrite, you
can lock up to 3 maps.
Preparing the room for mapping
Before you start mapping, make sure to:
-
Tidy up the area.
-
Put furniture in the proper place.
-
Put away loose and small obstacles.
Note: This is important to avoid permanently storing the obstacles on the
map.
-
Open all in-house doors.
Important: Make sure the robot cannot get blocked during use.
Creating a map
Important: During mapping your robot will not clean.
Important: To create a map of a floor, it is very important to place the station
on the floor that you want to map because the robot must be in the station
when starting and ending the mapping. If you want to create a map of the 2nd
floor, the station must be placed there during the mapping process. Thereafter
the map of this floor can be used even if the station is on another floor.
Note: For model XU7100 only, after the robot has completed its mapping run,
the Auto-empty station will start emptying the robot. This is not an error but
normal behavior.