Sagi 3241730 Manual De Uso página 74

Gently remove the shelves paying great attention to not damage them.
Mount the rear support included in the lower part, locking it in place with the hex screw.
The other rear supports and all the front ones are already pre-mounted.
Unscrew the upper part of the rear support bush.
Mount the shelves, resting them on the supports and inserting them in the rear support bush.
Screw in the upper part of the bush to lock the shelf in place.
Adjust the rotation of the shelf by undoing the hex screw under the support bush.
Pull the shelf toward the front until it comes into contact with the pins on the front supports.
Check that the shelf rotates easily.
Tighten the hex screw to lock the shelf in place.
Clean the unit and the shelves as described in the Chapter "CLEANING". After having cleaned it, leave the
door open at least 72 hours before putting the unit into operation.
6