Honeywell CL202PEUI Manual De Usuario página 8

Idiomas disponibles

Idiomas disponibles

USE & OPERATION (CONTINUED)
CLEANING THE HONEYCOMB COOLING MEDIA WITH ANTIBACTERIAL TREATMENT⁺
The appliance is supplied with a Mesh Filter and Honeycomb Cooling Media with Antibacterial
Treatment⁺.
The Mesh Filter and Honeycomb Cooling Media with Antibacterial Treatment⁺ are located inside
the Rear Grill. See Figure 1 for instructions on how to remove them from the unit for cleaning and
maintenance.
Do not run the unit in COOL mode with stale water in the tank. You must empty the water tank and
refill with fresh water, especially if the tank has not been cleaned in a long time.
The cleaning frequency for the Honeycomb Cooling Media with Antibacterial Treatment⁺ depends
on local air and water conditions. In areas where the mineral content of water is high, mineral
deposits may build up on the Honeycomb Cooling Media with Antibacterial Treatment⁺ and restrict
air flow. Draining the water tank and refilling with fresh water at least once a week will
help reduce mineral deposits. If mineral deposits remain on the Honeycomb Cooling Media with
Antibacterial Treatment⁺ , the media should be removed and washed under fresh water. The media
should be cleaned every two months or sooner, depending on your needs.
For best results allow the Honeycomb Cooling Media with Antibacterial Treatment⁺ to dry after each
use by turning off the cool function 15 minutes before turning the unit off.
Removing the Honeycomb Cooling Media with
Antibacterial Treatment⁺ :
1.
Remove all the screws from the Rear Grill of the Air
Cooler.
2.
Carefully pull out the rear grill from the cooler.
3.
Remove the screws on the base of the Honeycomb
Frame and slide out the Honeycomb Cooling Media
with Antibacterial Treatment⁺.
4.
Replace or clean media with water and a damp cloth as
needed.
WARNING: DO NOT operate the Air Cooler when the Rear
Grill is removed from the Air Cooler, or if there is a loose-
fitting Rear Grill. Doing so can cause serious injury or
dangerous electrical shock.
+ Antibacterial Honeycomb is up to 99%
A
Based on independent laboratory testing (report #WJ20182408), testing the antibacterial and cleaning function of the honeycomb
cooling pads against Escherichia coli (strain #ATCC 25922), Staphylococcus aureus (strain # ATCC 6538), Klebsiella Pneumonia
(strain # ATCC 4352) , as per testing standard JIS L 1902: 2015 Testing for antibacterial activity and efficacy on textile products &
GB 21551.2-2010 antibacterial and cleaning functions for household, and similar electrical appliances-Particular requirements of
material.
A
effective in killing certain types of bacteria through 48 hours of continuous use.
EN
Figure 1:
Cooling Media with
Antibacterial Treatment⁺
7
Honeycomb
Rear Grill
Honeycomb
Frame
Screws
loading