Playing Tracks In Random Order; Shuffle Play; Labeling A Cd; Disc Memo - Sony XR-C6100 Manual De Instrucciones

To repeat all the discs in the
current unit
Press (2) repeatedly during CD/MD
playback until "REP 3" is displayed.
Each time you press (2) the display changes as
follows:
REP 1
(Track repeat)
Cancel (Normal
disc playback mode)
* "REP 3" only when two or more CD/MD units are
connected the unit.
Playing tracks in random
order

— Shuffle play

EN
To play the tracks on the current
disc in random order
Press (3) repeatedly during CD/MD
playback until "SHUF 1" is displayed.
To play all the discs in the unit in
random order
Press (3) repeatedly during CD/MD
playback until "SHUF 2" is displayed.
To play all the discs in the current
connected CD/MD units in random
order
Press (3) repeatedly during CD/MD
playback until "SHUF 3" is displayed.
Each time you press (3) the display changes as
follows:
SHUF 1
(Disc shuffle)
Cancel (Normal disc
playback mode)
* "SHUF 3" only when two or more CD/MD units are
connected the unit.
Note
CD/MD units are operated separately.
If you press (1) during shuffle play, the first 10
seconds of all tracks will be played in random
order.
12
REP 2
(Disc repeat)
REP 3*
(Unit repeat)
SHUF 2
(Unit shuffle)
SHUF 3*
(All shuffle)

Labeling a CD

— Disc Memo

(CD unit with custom file function)
You can label each disc with a personalized
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate a disc by
name and select the specific tracks for
playback.
1
Play the CD and press (FILE) for two
seconds.
CD
2
Enter the characters.
1 Press (+) to select the desired
characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
CD
If you press (–), the characters appear
in the reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (SEL) after locating the desired
character.
The flashing cursor moves to the next
space.
CD
If you press (SEL) when the eighth
character (farthest right character) is
flashing, the flashing part goes back to
the first character (farthest left
character).
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to the normal CD playback
mode, press (FILE) for two seconds.
Tip
To erase/correct a name, enter "_" (under-bar) for each
character.
Note
If you try to label an MD and you have not connected a
CD changer with the custom file function "*FULL*" then
"--------" appear in the display, but you cannot input
characters. In this case, press (FILE) for two seconds.