Advanced Readings Menu - AERMEC MODUCONTROL Manual De Instrucciones

To enter the ADVANCED READINGS
menu, press the key shown in (Fig.7).
Once the key has been pressed the
password must be inserted for access
to the various menus. To access the user
menu the password is 010. To modify
PASSWORD = 010
Index - String
Inverter Current
Inverter output voltage
BUS voltage
Inverter dissipater temperature
Value of the dynamic OFF force
DHW remote probe value
Compressor intake probe value
52
EN
IMDCFJ. 12.05 6343841_03

ADVANCED READINGS menu

the value of the password use the arrow
keys. Once the correct password has
been inserted, press the key shown in
(Fig.7). The display shows the index of
the reading and a string of three char-
acters that identify it. The string remains
Fig.7
List of indexes and relative ADVANCED READINGS MENU readings
Reading Meaning
Current (in Amperes) measured by the inverter module;
Parameter displayed with ANLI 21, 26, 40, 45, 71, 75, 80,100 only;
Output voltage (in Volt) measured by the inverter module;
Parameter displayed with ANLI21, 26, 40, 45, 71, 75, 80,100 only;
BUS voltage (in Volt) measured by the inverter module;
Parameter displayed with ANLI21, 26, 40, 45, 71, 75, 80,100 only;
Temperature (in C°) of the inverter module heat dissipater; Parameter dis-
played with ANL21, 26, 40, 45, 71, 75, 80,100 inverter only;
Current dynamic ForceOff value calculated on the basis of the outdoor air
temperature
Value read by the remote probe positioned in the plant water storage tank;
function enabled by the parameter (0) in the INSTALLER menu
Temperature read from the robe positioned on compressor intake.
Parameter displayed only with ANLI 21, 26, 40, 45, 71, 75, 80;
displayed for one second, after which it
is replaced by the value relative to the
reading itself. To pass to the next read-
ing, use the arrow keys (Fig.8).
Fig.8
Notes