Identification Label; Receiving And Storage - WEG CFW300 Manual Del Usuario

2.4 IDENTIFICATION LABEL

The identification label is located on the side of the inverter. For further details on positioning
the label, refer to Figure A2 on page
1
2
3
4
5
(a) Side label of the CFW300 - 200 V Line
(1) Model (Inverter intelligent code).
(2) WEG stock item.
(3) Production order.
(4) Rated input data (voltage, current and frequency).
(5) Certifications.
(6) Serial number.
(*) Voltage Range 1: Rated currents specified for mains power supply voltages of 380-400-415 Vac (513-540-560 Vdc).
(**) Voltage Range 2: Rated currents specified for mains power supply voltages of 440-460-480 Vac (594-621-650 Vdc).
For further details, refer to Table B1 on page 128
Figure 2.6: (a) and (b) Description of the CFW300 identification label

2.5 RECEIVING AND STORAGE

The CFW300 is supplied packed in a cardboard box. There is an identification label affixed to
the outside of the package, identical to the one affixed to the side of the inverter.
Verify whether:
The CFW300 identification label corresponds to the purchased model.
„
Any damage occurred during transportation.
„
Report any damage immediately to the carrier.
If the CFW300 is not installed soon, store it in a clean and dry location (temperature between
-25 ºC and 60 ºC (-13 ºF and 140 ºF)), with a cover to prevent dust accumulation inside it.
ATTENTION!
When the inverter is stored for a long period, it becomes necessary to perform
the capacitor reforming. Refer to the procedure recommended in
PREVENTIVE MAINTENANCE on page 34
125.
1
6 2
7 3
4
8
9
10
5
(7) Manufacturing date (14 corresponds to the week and I to the year).
(8) Rated output data (voltage, current and frequency).
(9) Input current for voltage range 1
(10) Input current for voltage range 2
(11) Output current for voltage range 1
(12) Output current for voltage range 2
and Table B4 on page 135, and also to the
General Information
(b) Side label of the CFW300 - 400 V Line
.
(**)
.
(**)
(**) .
.
(**)
CFW300 programming manual.
of this manual.
6
7
8
11
12
Section 6.4
CFW300 | 11