Steinberg Systems SBS-PT-200S Manual De Instrucciones página 49

50. Display
51. "ON (on) / OFF (off)" button.
52. "UNIT" button - change of measurement unit
53. "ZERO/TARE" button - zero/tare function
54. "HOLD" button - retaining the weight reading
A. Selected unit of measurement indicator
B. Zeroing indicator
C. Measurement error indicator
D. Enabled reading retention function indicator
E. Stability of readings indicator
3.2. Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a
minimum clearance of 10 cm from any wall of the unit. Keep the unit away from any
hot surfaces. Always operate the unit on a level, stable, clean, fireproof and dry
surface and out of the reach of children and persons of impaired mental, sensory
and intellectual functions. Place the unit in such a way that the mains plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
HANGING OF THE DISPLAY (models SBS-PT-60SNL; SBS-PT-150SNL; SBS-PT-30SN;
SBS-PT-150SN):
1. Drill a hole for a wall plug at the target location of the display installation.
2. Place the wall stud in the drilled hole.