Denver IR-100 Manual Del Usuario página 5

Ocultar thumbs Ver también para IR-100:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
Note: Information on the WLAN/WiFi network connection can be obtained from the user manual of the
router manufacturer.
Walls or other obstacles may influence the WiFi range. Try to find the best location to avoid interruption
and interference while operating.
GETTING STARTED
Press the
button once to switch on the radio, the display will show the main menu. To go to a function
or open a sub-menu, rotate the SELECT control followed by pressing on it to confirm. Each function is
selected via a menu consisting of several levels.
Main menu
The following modes can be selected in the main menu:
Internet radio, Music player, DAB radio, FM radio, AUX in, Sleep, Alarms, System settings.
To select your desired function, rotate the SELECT control followed by pressing on it to confirm.
System settings
Setup wizard
The setup wizard is available in the system settings section, you can run through this to configure
settings for date/time and network, once this has finished, your radio is ready to use.
Note: No need to run through the setup wizard if a wired network is used.
12/24 hour display
To select your preference between 12 or 24 hour clock display format-rotate the SELECT control
followed by pressing on it to confirm.
Time/Date
The time and date can be manually set or automatically via the network, DAB or FM.
Auto update
The auto update works with data sent over DAB, FM or the Internet. The clock is only updated when in a
corresponding mode, so it is recommended to select a mode that you use regularly.
1.
Select auto update from DAB, FM or Network.
2.
Select the appropriate time zone if the auto update is done by the Internet.
3.
If your country uses daylight saving, the automatically update time may be wrong by one hour. Set
the daylight savings to ON when daylight savings are in effect.
Manual set
1.
If "No update" is selected, the wizard will prompt you to set the time
and date manually. The date and time are displayed in dd-mm-yyyy
and hh:mm AM/PM format.
2.
The value to be set will flash, rotate the SELECT control to adjust the
value followed by pressing on it to go for the next setting, firs set the
date then finally the time.
Network
The unit is compatible to all standard network protocols and encryption methods, including Wi-Fi
Protected Setup (WPS). In case of an unencrypted network, the unit will automatically establish
connection and no further settings are necessary.
ENG-4
loading