Idiomas disponibles
Idiomas disponibles
stations. To change the scan settings to stop only at stations with good signal strength, press the MENU
button then enter into the "Scan setting" section and select YES by the use of the SELECT control.
Audio settings
The radio will automatically switch between FM stereo and mono reception, but you can override this
and switch this function manually which is helpful for poor signal reception.
To select listening in mono, press the MENU button then enter into the "Audio setting" section and select
YES by the use of the SELECT control.
Note: During FM stereo reception, the received L/R stereo sound will be automatically combined to one
single channel to suit the single speaker design of this radio.
AUX in
AUX in mode plays audio from an external audio source such as MP3
player. To play audio with Aux in mode:
1.
Decrease the volume level on both the radio and the audio source
device.
2.
Connect the external audio source to the AUX IN (3.5mm) stereo
socket.
3.
Either press MODE until the display shows "AUX in" or select "AUX
in" in the main menu by the use of the SELECT control,
4.
Set the desired volume on the radio and the external audio device if
necessary.
Note: To further enhance energy saving, unit will go into standby mode
after about 15 minutes from Aux in mode if without signal input.
ALARMS AND SLEEP
Alarms
There are two wake-up alarms with snooze function and one sleep function to turn the radio off after a
set period. Each alarm can be set to start in a particular mode. To set or change an alarm:
1.
Select either Alarm 1 or 2 in the main menu or press the ALARM button on the remote control.
2.
Select the Alarm number (1 or 2) and set the following parameters:
Enable: Off, Daily, Once, Weekends, Weekdays
Time:
Mode: Buzzer, Internet radio, DAB, FM
Preset: Last listened or 1-10
Volume: 0-32
3.
To activate the new settings, scroll down the menu using the SELECT control and select "Save".
The display will show the active alarms with an icon at the bottom left.
4.
The alarm will be triggered at the preset time. To temporarily silence it, press the SNOOZE button.
The Radio will switch to standby for the set period, and the silenced alarm icon flashes in the
display.
5.
During alarm, you can change the snooze period by repeatedly pressing on the SNOOZE button.
ENG-11
