3. Place a firelighter cube in the lower layer of kin-
dling and light the cube according to the instruc-
tions on the packaging.
4. Close the door of the appliance and open the pri-
mary air inlet (1) and the secondary air inlet (2) of
the appliance; see the following figure.
The air slide is open when the handle is point-
ing downwards. The air slide is closed when
the handle is horizontal, pointing to the right.
5. Allow the fire develop into a good blaze until there
is glowing bed of charcoal. You can then add fuel
and adjust the appliance, see the chapter "Stoking
with wood".
Burning wood
After you have followed the instructions for lighting :
Energies se reserva el derecho de realizar cambios por razones técnicas.
1. Slowly open the stove door.
2. Spread the charcoal evenly across the bottom of
the stove base.
3. Stack a few logs on the charcoal.
Open stacking
If the logs are stacked openly, the wood will burn
quickly as the oxygen can reach each log easily. If
you want to use the stove for a short while, make an
open stack.
Compact stacking
If the logs are stacked tightly, the wood will burn more
slowly as the oxygen can only reach some logs
easily. If you want to burn wood for a longer period,
make a compact stack.
12