Idiomas disponibles
Idiomas disponibles
If you detect damage caused during transport
or any other damage or defects, do not use the
appliance and notify the supplier.
Remove the removable parts (fire-resistant inner
plates, fire grate, ash pan) from the appliance
before starting to install the appliance.
It is easier to move the appliance and to avoid
damage if the removable parts have been
removed.
Note the location of the removable parts, so
that you can re-position the parts in the correct
place later on.
1. To open the door turn the handle left; see following
figure.
The appliance is supplied with the latch button
installed.
2. Remove the fire-resistant inner plates; see the fol-
lowing figure.
Vermiculite inner plates are light and tend to be
ochrous in colour on delivery. They insulate the
combustion chamber to boost combustion.
3. Close the door.
The door is provided with click-closure. The
door bolts automatically, if you close the door
with sufficient speed.
9
Removable internal sections
right-hand bottom of the fire
1 03.66539.002
compartment
left-hand bottom of the fire
2 03.66540.002
compartment
rear bottom of the fire com-
3 03.66541.000
partment
front bottom of the fire com-
4 03.66542.000
partment
centre bottom of the fire com-
5 03.66537.002
partment
6 03.05407.020
ash removal port
7 03.77512.000
vermiculite top side wall
8 03.77507.000
vermiculite back wall
9 03.77508.000
vermiculite side wall
10 03.77509.000
vermiculite fire plate
11 03.77413.002
fire basket
12 03.05236.000
ash pan
Preparing the connection to
the flue
When connecting the stove to the flue, you can
choose to connect to the top or rear of the stove.
When the stove is delivered, the connection at
the rear is closed.
Plug the outlet you don't wish to use with the cor-
responding supplied cover.
Install the supplied corresponding connection collar
to the outlet you wish to use.
Sealant and materials are supplied.
Subject to change because of technical improvements.
