Nilfisk MC 2C-80/520 US-CAN Manual De Instrucciones página 16

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 185
6 Fields of application and working
methods
6.1 General
6.1.1 Detergent and foam
6.1.2 Mechanical effect
16
Efficient high pressure cleaning is achieved by following a few
guidelines, combined with your own personal experience of specific
cleaning tasks. Accessories and detergents, when correctly cho-
sen, can increase the efficiency of your pressure washer. Here is
some basic information about cleaning.
Foam or detergent should be applied onto dry surfaces so that the
chemical product is in direct contact with the dirt. Detergents are
applied from bottom to top, for example on a car bodywork, in order
to avoid "super clean" areas, where the detergent collects in higher
concentration and streams downwards. Let the detergent work for
several minutes before rinsing but never let it dry on the surface be-
ing cleaned. Note: It is important that the detergents do not dry up.
Otherwise the surfac that has to be cleaned can be da maged.
In order to break down tough layers of dirt, additional mechanical
effect may be required. Special wash brushes offer this supplemen-
tary effect that removes stubborn dirt, traffic film or the like.
Original Instructions
loading