Idiomas disponibles
Idiomas disponibles
USE OF THE MACHINE
Filling the tank
•Take the tank (8) out of the machine by pulling it
upwards, then remove the cover (Fig.1)
•Fill the tank to the maximum level (1.8 l). (Fig.2)
•Close the cover and insert the tank (8) against the
machine body so that the tab engages and the
base of the tank rests correctly on the water valve.
(Fig.3)
ATTENTION:
To avoid water leakages, check that the tank
is correctly secured.
NOTE:
The light (14) (VAP and 4D Model) on the control
panel indicates that there is no water in the tank
(Fig.4); fill the tank (8) as instructed above.
Fig. 4
14
27
Fig. 1
8
Fig. 2
Fig. 3
8
8
