Idiomas disponibles
Idiomas disponibles
7.2
7.2.1
Problem
The chain is noisy.
7.2.2
The motor does not
7.2.3
work.
After setting open and
close positions, the
7.2.4
motor does not work.
The door can't be
7.2.5
closed.
The wall button works
well, but the
7.2.6
transmitter doesn't
work.
Transmitter distance is
7.2.7
too short.
Examination Guide
Causes
The chain is too loose.
The socket is not well connect
or the fuse is broken.
The screws of fixing the Hall
components are loose or
program mistakes.
Photo beam function works.
No transmitter learning or
transmitter battery is power
off.
The transmitter battery is
nearly power off.
12
Solution
Adjust nut-M8 referring to
3.2.C.
Check the socket or
replace the fuse.
Tighten the screws or
resetting open and close
positions.
Cancel the photo beam
function, referring to 6.6.
Code referring to 6.4 or
change new transmitter
battery.
Change new battery.
