Idiomas disponibles
Idiomas disponibles
Fix the anchor piece of the guide to the wall as indicated in the drawing.
Insert the shuttle into the groove of the chain drive rail. Be sure it faces the right
direction (the release arm on the shuttle towards the powerhead). Fasten the four screws
(M6x22mm) (see fig. A).
Place the powerhead on the floor, add
cardboard
packing
powerhead from scratching by the floor.
Attach the powerhead unit to the chain
drive rail, make sure the spindle is
inserted into the chain drive, then fix the
brackets.
Place the operator in the center of the floor. Lift the front end of the rail up to the
header bracket that has been mounted above the
garage door, insert the bolt and secure it with nut
fig. B).
to
protect
the
4
A
(see
B
