Hilti DX 9-ENP Manual De Instrucciones página 37

• It is a requirement for EFTA countries that the cartridges must be CE-compliant and must bear the CE
mark of compliance.
• It is a requirement for the United Kingdom that the cartridges must be UKCA-compliant and must bear
the UKCA mark of compliance.
• It is a requirement for the USA that the cartridges must be compliant with the stipulations set out in
ANSI A10.3-2020.
• It is a requirement for the non-European member states of the C.I.P. that the cartridges must have C.I.P.
approval for the DX fastening tool used.
• It is a requirement for the remaining countries that the cartridges must have passed the firing-residues
test in accordance with EN 16264 and must have a manufacturer's declaration to this effect.
Cartridges
Item number Ordering designation
2128213 6.8/18 M40 black
2128211 6.8/18 M40 red
3.10 Items supplied
Fastening tool, toolbox, cleaning set, scraper, ramrod, Hilti lubricant spray, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4 Technical data
4.1 Technical data
Weight in accordance with EPTA procedure 01
Dimensions (L × W × H)
Magazine capacity
Suitable cartridges
Suitable fasteners
Fastener driving rate
Thickness of the supporting steel
Compression stroke
Contact pressure
Application temperature (ambient temperature)
4.2 Noise information
The noise values listed were determined under the following conditions:
General conditions for noise measurements
Direct fastening tool
Model
Caliber
Power setting
Application
Noise information in accordance with EN 15895
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Sound (power) level (L
WA
Uncertainty for the sound power level (K
*2241307*
Annotation
very strong
strong
)
pA
)
pA
)
)
WA
2241307
DX 9–ENP
12.5 kg
985 mm × 365 mm × 175 mm
40 nails / 40 cartridges
6.8/18 M40 red, black, blue
X­ENP 19
1,200 rev/h
≥ 6 mm
89 mm
≥ 250 N ... < 330 N
−15 ℃ ... 50 ℃
DX 9–ENP
Series
6.8/18 black
4
Fastening to steel plate (Brinell
hardness 610 N/mm ) using the
2
X­ENP­19 L15MXR
103 dB(A)
2 dB(A)
113 dB(A)
2 dB(A)
English 29