Vortice VORT HR 200 Manual De Instrucciones página 33

ENGLISH
44
ON/OFF key (fig. 44)
14:38
DISPLAY
SET
To turn the appliance ON and OFF. The command is only
carried out if the key is kept pressed for at least half a
second.
4) Setting the required motor speed using the remote
control unit (fig. 45).
45
SET key (fig. 45)
14:38
DISPLAY
SET
For setting the minimum (V min ) and maximum (V max )
speeds. To move from one parameter to the next, use
the NEXT key.
MAN
Fr
SUMMER
TIMER MODE
NEXT ENTER
AUTO
Fr
TIMER MODE
NEXT ENTER
46
V min setting (fig. 46):
SL03
• to display the setting, press SET, NEXT (starting from
the main menu);
• to set the value of the flashing field with the + and -
keys (from 0 to 60); press ENTER or NEXT to confirm.
The display will switch to the V max setting.
47
V max setting (fig. 47):
SH50
• to display the setting, press: SET, NEXT (starting from
the main menu);
• to set the value of the flashing field with the + and -
keys (from V max +10 to 99); press ENTER or NEXT to
confirm. The display will switch to the main screen.
5) When you have finished making the settings, turn the
remote control unit OFF (the motors will also stop) and
remove the connection with the external radio
module.
6) Disconnect the power supply to the appliance. When
restarted, the system will operate using the configured
settings. the trimmer reading will be ignored.
N.B.
After a certain period of inactivity (about 5 secs) the
remote control unit goes into "stand-by" mode; pressing
any key for a few seconds will reactivate the unit.
33