Idiomas disponibles
Idiomas disponibles
j)
Turn the door of the unit by 180° and slide it into the mounting pin of the left
hinge.
k) Install the bottom hinge of the left side. Slide the hinge pin into the dedicated
mounting hole of the door and fix with the fasteners (Fig. G).
l)
Install the unit door bracket (fig. H).
m) To do this, remove the gasket on the inside of the door. The structure of the
unit, under the sealing element, contains dedicated mounting holes.
n) CAUTION! Regardless of the side of the installation of the bracket (left / right),
the factory designed mounting holes for each side.
o) Prepare the mounts. Slide a lock washer onto the mounting screw, followed by
a flat washer.
p) Apply the unit bracket from the outside of the door. Align the axes of the
mounting holes of the bracket and the door.
q) Pass the previously prepared mounting structure through the top and bottom
mounting holes. Press the mounts together.
r)
Reinstall the gasket at the dedicated location.
s)
In order to build the unit, it is necessary to install a suitable bracket, attaching
the unit with the upper housing. The connecting bracket is supplied with the
unit. The mounting of the bracket should be selected individually, according to
the regulations of your country.
t)
Install the connecting bracket at the top of the unit, in place of the dedicated
mounting holes. Embed the unit in the target location and attach it to the top
of the housing (see Figure H).
u) Adjust the level/height of the unit using the front bases (their rotation clockwise
or counterclockwise).
v) CAUTION! Due to the tilting of the unit during door installation, wait 8 hours for
the refrigerant used inside the unit to stabilize before connecting the fixture to
the mains!
