Qilive Q.5822 Manual De Instrucciones página 9

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
6.
Let the solution stand for 15 minutes and then repeat steps 3 and 5.
7.
Turn on the appliance and let it continue its cycle until the solution has fully percolated.
8.
Once the percolation process has finished, remove the full glass jug (3). Hold the glass jug
only by the handle. Risk of burns!
9.
Descaling residue may affect the taste of coffee. Let the coffee maker perform two or three
percolation cycles with fresh water to eliminate all residue.
10.
Clean the appliance (
7. TROUBLESHOOTING
Problem
The percolation
process fails to start.
Coffee does not flow
into the glass jug (3).
Long percolation time
and louder noise
during percolation.
8. GUARANTEES
Guarantees and limitations of liability
Products are guaranteed for a period of 36 months from the date of purchase, or from the date of
delivery to the customer's home. Depending on the country, this guarantee consists of 24 to 36
months of validity for the legal compliance guarantee.
For countries that only implement a 24-month legal compliance guarantee, a 12-month commercial
guarantee is applied at the end of the first guarantee, and supplements it.
Guarantee application procedure
For the legal compliance guarantee
Please consult your retailer for information and/or to refer to their GTCs (General Terms and
Conditions of Sale).
For the commercial guarantee
Please go to the reception desk at your place of purchase with your proof of purchase (e.g. sales
receipt), the product and the accessories it came with, and its original packaging, for all countries
other than France. It is important to have the date of purchase, the model and the serial number
or IMEI number to hand (this information is usually indicated on the product, packaging, or on
your proof of purchase). You'll need to bring back the product with the accessories needed for its
correct functioning (power supply, adapter, etc.). If your claim is covered by the guarantee, the
6. CLEANING AND MAINTENANCE, p. 10).
Possible cause
The plug (7) is not
properly connected.
The appliance is not
turned on.
The glass jug (3) is not
properly in position on
the hot plate (4).
Descaling is needed.
9
Solution
Check that the power cable (7) is
properly connected to a power socket.
Press the On/Off button
Place the glass jug (3) in the proper
position on the hot plate (4), otherwise
the anti-drip function of the filter holder
(2) will not be activated.
Descale the coffee maker
(
Descaling).
EN
(5) again.
loading