Idiomas disponibles
Idiomas disponibles
CARE & MAINTENANCE
Proper cleaning, maintenance, and storage is essential to help prolong the life of your product. Do not
use petroleum-based cleaners on this product. Improper use of a pressure washer can damage or
destroy the product.
Basic Cleaning: Always rinse product thoroughly with fresh water after use in salt water or any water
containing large amount of sediment or algae. This helps prevent buildup of dirt particles which can
accelerate wear. For deeper cleaning, use soft bristly brush or sponge with mild soap and fresh water.
Difficult Cleaning: For heavy stains, marine growth, algae, mold, dirt and oils use a non-caustic
cleaning product like Simple Green or citrus-based cleaner after checking to confirm compatibility. Also,
check with your distributor, or on our website, Aquaglide.com for commercial-grade cleaning solutions.
UV Awareness: This product is made with TPU which is highly UV-resistant. No UV treatments are
required for normal use, but be aware that long-term exposure to sunlight can reduce product life and
may damage certain parts of the product. Do not leave or store the product in sunlight for extended
periods.
Replacement parts: Items like bladders, valves, PRV's, straps, handles, rings and other accessories
can occasionally wear out and need replacement to maintain the full function of your product. Check with
your distributor, or on our website, Aquaglide.com for available parts and replacement instructions.
STORAGE
Clean, Protect, Dry: Clean and dry product before long-term storage. To prevent damage from mold/
mildew, confirm product is completely dry before folding.
Deflate & Fold: Deflate product completely. Consider using pump in 'deflate' mode to remove air.
Leave valves open to vent trapped air during folding. Fold deflated product in similar manner to original
packaging. If uncertain, fold side tubes inward lengthwise, then flat roll from front to back - toward the
valves. Remove seats and footrests from hull if necessary for tighter packing. Place in original storage/
dry bag with extra air removed and top sealed.
Storage: Store the product out of direct sunlight and protect from environment in a clean, dry location
such as a sealed closet, crate or container to prevent against rodent damage. Never store in a damp
location or at temperatures below 40 F (4 C).
9
www.aquaglide.com
