Bulldog DC Serie Manual De Instrucciones página 8

1.3 Determine Mount Position
WARNING
Failure to adequately align, support, or attach the winch to a suitable mounting base could
result in a loss of efficiency of performance or damage to the winch, wire rope and mounting
surface.
1.4 Install the Winch
1. Make sure the winch is aligned correctly
2. Set winch in mounting location. Confirm required bolt length.
3. Install bolts, nuts, and lock washers and tighten to torque specified in Table 4 below.
Figure 3
FOOTPRINT
7.48" / 190mm
Powered
Winches
Winch
Mounting
Bolt Size
Winch
Mounting
Bolt Torque
8
CEQUENT
Installation Instructions
2–ø.433" /
2–ø11mm
Table 4 - Mounting Torque Requirements
DC2500
M10 x
1.5 pitch
8.8 grade
2 Required
40 ft./lbs.
PERFORMANCE PRODUCTS, INC. •
™
DC3500
M10 x
1.5 pitch
8.8 grade
2 Required
40 ft./lbs.
F3837-00 REV B (4782) 08/15
Figure 4
DC4500
M10 x
1.5 pitch
8.8 grade
2 Required
40 ft./lbs.