Idiomas disponibles
Idiomas disponibles
Getting started:
Open the battery compartment and insert 2 x AA batteries accordingly to the correct +/-
polarity shown in battery compartment. Close the battery compartment again.
LCD will display all symbols for 2 seconds and you will hear a signal tone, then the clock
will enter DCF reception.
Reception of the Radio signal:
The clock automatically starts the DCF signal search when the batteries are inserted. The
DCF reception icon (radio mast symbol) starts to flash.
At 1:00 AM the radio-controlled clock automatically carries out a synchronization
procedure with the DCF signal to correct any deviations to the exact time. If this
synchronization attempt is unsuccessful (the radio mast symbol disappears from the
display), the system will automatically attempt another synchronization at the next full
hour. This procedure is repeated automatically up to 5 times.
Press and hold the "DOWN" button to manually start the DCF signal reception. If no signal
is received within seven minutes, then the DCF signal search stops (the radio mast
symbol disappears) and starts again the next full hour.
EN2
