Idiomas disponibles
Idiomas disponibles
2. How to use
Carpet cleaner description
2-1
1
2
3
4
5
6
7
8
10
11
17
16
14
15
2-2
ON/OFF switch
To turn cleaner ON, push switch down.
To turn cleaner OFF, push switch up.
All manuals and user guides at all-guides.com
18
19
20
21
9
22
12
23
12
13
24
2-3
Handle release pedal
Step on pedal (A) to lower handle to
operating position. Handle does not lock
into a single position but "floats" to allow
convenient operation.
The assembled carpet cleaner will look like the drawing.
Model with SpinScrub™ hand tool is shown.
1. Hand grip
2. Solution trigger: press to release cleaning
solution
3. ON/OFF switch
4. Rinse Setting switch
5. SpinScrub™ hand tool (not included with all
models)
6. Carrying handle
7. Clean water tank handle
8. Clean water tank
9. Detergent container
10. Recovery tank handle
11. Recovery tank: holds dirty solution
12. Recovery tank latches
13. Solution tube connection port
14. Brush setting selector
15. Edge cleaners: provided on both sides of nozzle to
remove dirt near baseboards
16. Nozzle
17. Hose connection port
18. Cord hook: rotates for quick cord release
19. Hose
20. Hose/tool caddy
21. Stair/upholstery nozzle
22. Bare floor tool (available at additional cost if
not included with your cleaner)
23. Cord/hose hook
24. Handle release pedal
This carpet cleaner is intended for household use.
Operate carpet cleaner only at voltage specified on
data plate on back of cleaner. Plug carpet cleaner
into a properly grounded outlet.
A
2-4
To transport
To move your carpet cleaner from room
to room, put handle in upright and
locked position, tilt carpet cleaner back
on wheels and push forward.
Continued
7
