Idiomas disponibles
Idiomas disponibles
AIR CUSHION
The air cushion only functions when the back massage function is not in use. To inflate or deflate
the cushion, use the up and down arrows to set your desired inflation. The air cushion inflates to
stretch back muscles for improved flexibility. The air cushion also provides lumbar support when
you are sitting on the cushion without the back massage function on.
VIBRATION
To add seat vibration, press the vibration button once. To turn off, press the button again. Vibration
waves improve circulation and loosen tight muscles. To toggle between the three vibration
intensities, press the vibration button.
HEAT
This massage cushion is equipped with heat in the neck and back. For soothing heat, when massage
is on, press the heat h button and the corresponding red LED light will illuminate. To deselect, press
the button again and the corresponding LED will turn off. For your safety, heat cannot be turned on if a
massage program is not selected.
BACK MASSAGE
To turn on the back massage, press the back button. The cushion is equipped with zone control. The
massage will begin in full back mode. Press the button a second time to focus the massage on your
mid to lower back. Press the button a third time to focus on your mid to upper back. Pressing the
button a fourth time will turn off the back massage.
SPOT MASSAGE
While the back massage function is on, press either spot massage arrow to stop and focus
the shiatsu action in one place. Once the unit is operating in spot shiatsu, you may adjust the
mechanism position by holding down either arrow until the desired position is reached.
SPEED
To increase the massage speed, press the speed button to toggle from low to high speed. A light will
illuminate to indicate the speed the unit is currently on. The massage will be gentle on low speed
and more intense on high speed.
NOTE: When the power
button is pressed for first-time use, the moving mechanism will automatically
move to the lowest position before starting a massage program. After initial use, the mechanism will
always park at the lowest position. See note below regarding parking.
NOTE: The moving massage mechanism always "parks" or finishes in its lowest position. It continues
to this position after the power has been turned off. If the electrical supply is interrupted, when power is
restored, the mechanism will "park" or move to its lowest position.
7
