Idiomas disponibles
Idiomas disponibles
Spare Parts
Only use original Kärcher spare parts. You
will find a list of spare parts at the end of this
document.
Special accessories
Hose drum
High pressure hose 25 m
High pressure hose 40m
Troubleshooting
You can rectify minor faults yourself with the
help of the following overview.
If in doubt, please consult the authorized
customer service.
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and maintenance
work.
Warning
Repair works may only be performed by the
authorized customer service.
Indicator lamp
The indicator lamps display the operating
states (green) and interruptions (red).
Reset:
Set the appliance switch to "0".
Wait for a while.
Set the appliance switch to "I".
Operating status display
Continuous green:
– The appliance is now ready for opera-
tion.
1x blinking green:
– Operational readiness has expired after
30 minutes.
– The appliance has switched off after 30
minutes of continuous operation (safety
if the high pressure hose bursts).
Fault indication
Continuous red light:
18
English
– Electrical problems in appliance
– High pressure side is leaky
2.641-166
– Engine overload/overheat
6.391-513
6.391-510
– Fault in the voltage supply
– Power consumption is too high
– No power
– Indicator lamp is blinking green
– Motor overloaded/ over-heated or elec-
Pull out the mains plug.
Call Customer Service.
1x blinking red:
Check high pressure hose, hose con-
nections and hand spray gun for leaks.
2x blinking red:
Set the appliance switch to "0".
Allow device to cool down.
Set the appliance switch to "I".
3x blinking red:
Check main connections and mains
fuse.
4x blinking red:
Call Customer Service.
Appliance is not running
Check whether the voltage indicated on
the type plate corresponds to the voltage
of the socket.
Check the mains connection cable for
damages.
Operational readiness period has ex-
pired. Switch on/off the appliance again.
trical circuit breaker or winding protec-
tion switch has got released.
Switch off appliance and let it cool down.
Remove the cause of the problem. Turn
on the appliance again.
