Denver MCI-100 Manual De Instrucciones página 104

SLEEP
1. Press the "SLEEP" button on remote control, display will show "SLEEP 90". That means, after 90
minutes, appliance will automatically turn to standby mode.
2. Press the "SLEEP" button again to select the automatically turn off time, from 90, 80, 70, 60, 50,
40, 30, 20, 10 minutes.
3. Press the "SLEEP" button to "SLEEP 00" to canel sleep function.
CLOCK SETTING
1. Press the "STANDBY" button to switch unit at standby mode.
2. Press the "CLOCK" button twice to entry clock set mode. The display will show "24H" and
flashing.
3. Adjust time format ( 12H / 24H ) by pressing the "SKIP +" or "SKIP -" button.
4. Press the "CLOCK" button to confirm time format, display will show "AM" or "PM" if 12H
format is set.
5. Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "CLOCK" button to confirm.
6. Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "CLOCK" button to confirm.
Notes:
Because clock setting is at standby mode, the display is dim.
TIMER SETTING
Timer setting must be after completed clock setting.
1. Press the "STANDBY" button to switch unit at standby mode.
2. Press the "TIMER" button on remote control to entry timer set mode.
3. The display will show "TIMER ON", press the "TIMER" button to entry "TIMER ON" setting.
4. Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "TIMER" button to confirm.
5. Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "TIMER" button to confirm.
6. The display will show "TIMER OFF", press the "TIMER" button to entry "TIMER OFF" setting.
7. Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "TIMER" button to confirm.
8. Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "TIMER" button to confirm.
9. Press the "TIMER" button on remote control to activate timer on / off function.
10.Press the "TIMER" button again on remote control to terminate timer setting.
OTHER FEATURES
E-10